Design, Manufacture and Supply of Acoustic, Access, and Sports Floor Systems

Full Access Steel F1

£51.00

Actual Area (m²) 1
Total Price £51.00

Height on top of existing floor * 

Ancillary Requirements * 

Description

Suitable for office and retail environments. Full access floor has been developed for areas where cable management is required throughout the entire floor area and where it is likely to be extensively adjusted throughout the life of the floor. Durabella pedestals have been developed to accommodate isolation pads protecting the floor from any surrounding vibration. The system is effective in overcoming difficult site problems. (See data sheet for further information).

Additional information

Floor Type

Ground thermal & levelled, First or above, thermal none levelling, First or above thermal levelling

Existing Floor

100 mm concrete, 150 mm concrete, 200 mm concrete, 250 mm concrete, Block & Beam, Don't know, Timber cross laminated timber (CLT)

Height on Top

55-70 mm, 70-85 mm, 85-100 mm, 100-115 mm, 115-130 mm, 130-145 mm, 150-1000 mm Contact office

Finishes

Carpet, Ceramics, Hard Wood, Heavy Stone Tile, Vinyl

Ancillary Requirements

None, Service void, Wet under floor heating, Service void with access panels for partial access floors (schools), Service void with access floor (retail + offices), Electric underfloor heating

Enhance loading

None, Increase load bearing up to 2.5 kn/m2, Increase load bearing up to 3.5 kn/m2, Increase loadbearing up to 5 kn/m2, Greater than 5 kn/m2 (confirm with office)

Enhance Sound proofing

No

Building Suitability

Cinema, Hospital, Offices, Residential, School / College / Academy, Student Accommodation, Theatre

Building Regulations

Standard Building Regulations

Product Documents

Datasheets