Design, Manufacture and Supply of Acoustic, Access, and Sports Floor Systems

Acoustic Batten Non Leveling

 

Durabella manufacture a variety of acoustic battens to suit all requirements. All Durabella acoustic battens meet Building Regulations and provide exceptional and effective sound impact insulation. All our battens have very low deflection rates using isolators that have a high resistance to compression under load.

 

The most common source of complaints with acoustic battens is adverse deflection or compression when loaded. Because of this we have produced a table of the various products in the marketplace to provide an indication of the expected deflection under loading. All the battens detailed in the comparison table will pass the stipulated acoustic requirements when tested in a laboratory environment. However, these tests are carried out without loading. All the materials will deflect when loaded and the compression of the resilient layer will affect the performance. It is, therefore, essential if you expect a resilient layer to continue to perform under load that the quality of the isolator should be sufficient to prevent deflection or compression when loaded.

 

Durabella acoustic battens range from standard Westbourne acoustic battens for residential use through to heavy commercial, retail and industrial battens.

 

All Durabella acoustic battens are 2.4 linear metres long and 46mm wide. The battens are available in heights from 30mm up to 130mm.

 

The isolators used on the battens are determined by the proposed end use. The isolators are pre-bonded onto the battens and range from 10mm up to 30mm.

 

Durabella acoustic battens are the perfect solution if you are working to Robust Details. When Durabella acoustic battens are installed as part of a complete sound reduction system they ensure that the floor system complies with the sound transmission regulations of Approved Document Part E (England and Wales).

 

The chart below shows the different types of Durabella acoustic battens available for the proposed end use that we produce.


All loadings are UDL (Uniformly Distributed Load) per m2.

ProductAvailable in Heights (5mm incrementsLoadings @ 400mm centresDeflection mm @ 400mm centresDeflection mm @ 300mm centresSizeSuitability
Standard Westbourne Acoustic Batten30mm-110mm1.5kN/m2 plus (150kg/m2)2mmLess than > 1mm2.4m long x 46mm wideStandard Residential
Premium Westbourne Acoustic Batten40mm-120mm2.5kN/m2 plus (250kg/m2)2mmLess than > 1mm2.4m long x 46mm wideHeavy Residential, Light Commercial
BREEM Acoustic Batten33mm-113mm2.5Kn/M2 plus (250kg/m2)2mmLess than > 1mm2.4m long x 46mm wideHeavy Residential, Light Commercial
BREEM+ Acoustic Batten36mm-116mm4kN/M2 plus (400kg/m2)2mmLess than > 1mm2.4m long x 46mm wideCommercial, Retail, Light Industrial
BREEM Premium Acoustic Batten43mm-123mm5kN/M2 plus (500kg/m2)2mmLess than > 1mm2.4m long x 46mm wideCommercial, Heavy Retail, Light Industrial
BREEM Premium + Acoustic Batten46mm-126mm7kN/M2 plus (700kg/m2)2mmLess than > 1mm2.4m long x 46mm wideHeavy Commercial, Heavy Retail, Industrial
Low Frequency Acoustic Batten50mm-130mm7kN/M2 plus (700kg/m2)2mmLess than > 1mm2.4m long x 46mm wideHeavy Commercial, Heavy Retail, Industrial, Low Frequency
Bamboo Acoustic Batten46mm-126mm10kN/M2 plus (1000kg/m2)2mmLess than > 1mm2m long x 46mm wideHeavy Commercial, Heavy Retail, Heavy Industrial

Showing all 10 results

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Feedback
    Feedback
    How would you rate your experience?
    Do you have any additional comment?
    Next
    Enter your email if you'd like us to contact you regarding with your feedback.
    Back
    Submit
    Thank you for submitting your feedback!